Hall sensor H02

Brief characteristics of sensor

Rotating sensor H02 is designed for automotive shaft position minitoring. For working with two inductors enable separation sparks at base state signal of sensor (Fall/Rise edge).

Physical principle is inteligent Hall sensor and Magnet. Magnetic field is breaking by ferro-magnetic (iron) rotating disc.

Sensor is determinate for ignition of type Universal Ignition and Direct Ignition.

Basic technical parameters

Parameter	Range
Supply voltage	4,5 – 30V
Amperage take-off	9 mA
Working revolutions	0 to 25.000 rpm
Working temperature	-40 to 150°C
Type of switching	Open colector (NPN)
Maximum switched amperage	40 mA
Maximum switched tension	40V
Tension drop in switched status	0,4V on 20 mA
Outer proportions	Ø17,9mm x 31,8mm