CZ
Hall sensor H02
Engine speed sensing from zero speed, three wires
Technical Specification
H02 is Hall sensor with integrated magnet.
The rotary disc or teeth must be from ferromagnetic material.
This sensor is suitable for use with ECU MASTER.
For wiring, we recommend to use K03 connector.
|
Parameter
| Range |
|---|---|
| Supply voltage | 4,5 – 30V |
| Amperage take-off | 9 mA |
| Working revolutions | 0 to 25.000 rpm |
| Working temperature | -40 to 150°C |
| Type of switching | Open colector (NPN) |
| Maximum switched amperage | 40 mA |
| Maximum switched tension | 40V |
| Tension drop in switched status | 0,4V on 20 mA |
| Outer proportions | Ø17,9mm x 31,8mm |
Mechanical schema
Electrical scheme
Available Variants
| Name | Cena s DPH | |
|---|---|---|
| Hall sensor H02 – Type Základní varianta | 27.00 € |
Recommended Accessories
-
Connector K03
Connector K03 for general use. Including 3 pcs terminals and grommets.
-
MASTER ignition
Engine control unit for 1 up to 16 cylinder engines. 4-12× TCI-CDI Outputs
-
Trigger wheel BASIC 6-1
Sensing disc with 5 teeth and 1 gap. Suitable use with MASTER ECUs.
-
Trigger wheel BASIC 12-2
Sensing disc with 10 teeth and 2 gaps. Suitable use with MASTER ECUs.
-
ECU MASTER LITE
Engine control unit for 1, 2 and 4 cylinder engines. 2× TCI Outputs
-
Trigger wheel 36-1
Sensing disc with 35 teeth and 1 gap. Suitable use with MASTER ECUs.
